Make you kayak more visible on the water. Light, mobile & flexible 1200mm whip.

• Increase visual presence on the water or farm
• Comes with 300 x 150 mm pennant
• Easily removed for transporting
• Can be re-tasked to fly a dive flag, by rolling up the existing pennant and sliding the sock the dive flag over the top.

What You Get
1200 mm (47.24 in) long, 6 mm (0.25 in) diameter flexible shaft with StarPort Mount (Male spigot)
(StarPort™Socket is not included. StarPort™Socket available separately)
150 x 300 mm (6 x 12 in) pennant (Yellow)

Available with White or Black base

Installation: StarPort™

• The StarPort™ can be mounted on the surface using the surface mount collar supplied or it can be recessed into any horizontal or vertical surface.
• Ensure you have adequate clearance behind the surface for screw and/or bolt penetration, and that no cabling, plumbing or rigging will be adversely affected.

• We recommend the use of a silicone-based sealant between the collar and the deck.
  Surface/ Recess Mount
• Drill holes using the template supplied.
  1. Surface Mount: Stack collar, gasket and StarPort™ in place, then fit bolts or screws.
  2. Recess Mount: Fit gasket and StarPort™ in place, then fit bolts or screws.
• Tighten nuts or screwheads to a firm tension.